This book is a treatise

You are here:
Estimated reading time: 1 min

Frequently Asked Questions

  • How does Automatic Emergency Braking work?

    If your car is equipped with Autopilot hardware, Automatic Emergency Braking automatically applies full braking in situations where a collision is considered imminent by the forward looking camera and the radar sensor. It is the driver’s responsibility to drive safely and remain in control of the vehicle at all times. Never depend on Automatic Emergency Braking to avoid or reduce the impact of a collision. To cancel Automatic Emergency Braking while it is engaged, press on either the accelerator or the brake pedal.

  • How do I turn off my car?

    You can turn off the car either by simply putting the car in Park, exiting the vehicle, and closing the door behind you, or by tapping Controls > E-Brake & Power Off > Power Off.

  • How do I use Autopilot?

    To learn about driving with Autopilot, view the following instructional videos: Enhance your commute with Autopilot, Autopark, Autosteer, Auto Lane Change, and Summon. For thorough instructions, Tesla encourages all new owners to review the Driver Assistance section in the Owner’s Manual.

    Also, check this video:

  • Why do my rated miles drop faster than mile for mile?

    Rated Range calculates your estimated range with a fixed formula based on existing energy in the battery and average energy consumed per mile. There are a few factors that could cause the rated miles to drop faster than mile for mile, i.e. driving style, wheel size, and ambient temperature.

  • My charging connector is stuck in the charge port. What do I do?

    Unlock the car before attempting to remove the connector. When your car is plugged in and locked, the connector locks into the charge port and the indicator light around the charge port turns off.

  • What does Range Mode do?

    Range Mode saves power by automatically limiting the amount of power the climate control system uses to maintain the temperature of the battery and the interior cabin. You can turn on this setting by tapping Controls > Driving > Range Mode.

  • Should I leave my Tesla plugged in while I’m on a trip?

    Tesla recommends keeping your car plugged in while you’re away on trips to ensure you return to a full battery. When not plugged in, the range slightly reduces each day.

  • How can I find nearby charging locations?

    The most convenient way to find nearby Superchargers, Destination Chargers, and other locations you’ve charged at before is by using the Navigation App on the touchscreen (tap the lightning bolt icon). There are also a variety of 3rd party smartphone apps you can download to locate charging options near you.

  • Why is my Supercharger charging slowly?

    There are a few factors that affect charging rate at a Supercharger. First, charging your battery from 10% to 80% is quick while charging from 80% to 100% doubles the charge time because the car must reduce current to “top off.” Second, extremely low ambient temperatures and extreme battery pack temperatures lead to slower charging rates. Third, sharing a Supercharger (i.e. two cars plugged in to 1A and 1B) can slightly reduce the charging rate of one or both of the cars. For more information about Supercharger, visit the Supercharger page on tesla.com.

  • How fast can I charge?

    Charging rate is primarily determined by what you’re plugged in to. A Tesla Supercharger charges up to 170 miles in just 30 minutes while the Tesla Wall Connector charges up to 58 miles per hour. For average charging rates of other options, check out the charging page on tesla.com.

    There are several other factors that affect charging rate: amount of power available from the charge source, extremely cold temperatures, and current state of charge (a nearly empty battery charges faster than a battery that is almost full).
No questions matching current filter

This article describes how to install MinervaKB plugin. Installing knowledge base is very easy and should not take more than a minute. We assume you already have a working WordPress installation and a user with admin privileges.

Tip 1: This guide is written for audience without much WordPress experience, so if you’re familiar with WP dashboard feel free to skip the obvious parts.
Tip 2: This guide has a video version. Please scroll to the bottom of the article to watch it.

Plugin upload

First of all, login to your WordPress dashboard. In the left menu select PluginsAdd New.

Add new plugin
Add new plugin

On the opened Add Plugins page select Upload Plugin in the top left corner of the screen.

Upload plugin
Upload plugin

After that plugin upload form should appear with Choose File and Install Now buttons. Press Choose File and select the zip file you received from Envato via opened file select dialog. Next, hit Install Now to start the upload and installation.

Upload form
Upload form

Activation

Next, after the installation process completes, press Activate Plugin button.

Plugin installation progress
Plugin installation progress

After the activation you will be redirected to Plugins page. Notice the message at the top of the screen, saying you should setup the knowledge base home page.

Creating home page

If you already have a page you would like to use as knowledge base root, just click the link in the message and select it. In this tutorial we assume this is a fresh install and you do not have pages yet, so let’s go ahead and create one.

In the left menu select PagesAdd New. A new page edit screen will open. At this point we only need to enter some title and publish the page.

Create home page
Create home page
We will use the title Knowledge Base throughout this guide, so please remember to replace it with any title you’ve selected.

Home Page setup

At this point you need to set your new page as knowledge base home page. In the left admin menu select MinervaKBSettings.

Setup home page
Setup home page

From the dropdown “Select page to display KB content” select your newly created page and press Save Settings in the top right area of the screen.

Conclusion

That’s it, you have finished installing knowledge base. Congratulations! Your home page is set, you can open it and it should display the search already. Home page will start to display topics once you add any content. Please refer to articles on content creation to learn more about that. You can configure the home page layout in the Settings or you can use Page Builder to do that. Home page configuration will be described in separate articles.

You can watch the video of the steps described above (1m 38s, with English subtitles):

https://youtu.be/EdR-5gen7L4?cc_load_policy=1

Thank you for reading.

 

Was this article helpful?
Dislike 0
Views: 10